6 Best Shower Grab Bars Reviewed in 2022 (2022)

6 Best Shower Grab Bars Reviewed in 2022 (1)

Whether you’re getting older or experiencing a temporary injury, one second of imbalance can lead to an accidentthat requires hospital care.Shower grab bars allow you to regain your balance quickly, even on the slippery surface of a bathtub. We picked the six best shower grab bars to help you find one that works for your needs,budget and bathroom.

What are the best bathroom grab bars?

There are hundreds of grab bar products in a variety of designs and price rangeson the market, which makes it difficult to determine which is best for you. We considered price, design, durability and ease of installation to choose thesix best bathroom grab bars.

  • Our favorite straight grab bar:
    Vive Metal Grab Bar
  • Our favorite suction grab bars for showers:
    Safe-er-Grip Shower Handle
  • Our favorite grab bar with shelf:
    Moen LR2354DBN
  • Our favorite bathtub safety rail:
    Vaunn Bathtub Rail
  • Our favorite curved grab bar:
    Stander Security Pole
  • Our favorite adjustable grab bar:
    Drive Medical Adjustable Safety Rail

What's the best location for grab bars in showers?

The best shower grab bar placement varies depending on the design, but the typical grab bar height for standard, horizontal handles in a shower is between 33 and 36 inches from the floor. Many grab bar designsfit specific locations, including the edge of a tub or the corner of the shower. Each grab bar has different characteristics, soread all installation instructions before drilling a hole in your wall.

If you choose an easily removable design, test out a few locations to find theplacement that's most comfortable for your height.

(Video) Best Suction Grab Bars 2022 [Top 6 Suction Grab Bars Review]

What to consider when purchasing a shower grab bar

When shopping for a bathroom grab bar, consider:

  • Bath or shower size:A grab bar should be small enough to fit your space but large enough that you can reach it from anywhere in your bath. Different designs have different size and location options.
  • Weight: If you need to lean on a grab bar, choose one that can hold yourweight. Permanently installed grab bars, for example, can withstand hundreds of pounds, butsuction cup grab bars can't supportas much direct weight.
  • Permanence: Many people opt for no-drill grab bar designs because they either have temporary needs ordon’t want to cause permanent damage to their bathrooms. Many grab bars use suction cups or tension mechanisms to stay in place, which means the installation doesn't leave marks in your bathroom.These designs have limitations, however, including limited weight ratings and higher maintenance requirements.
  • Your needs: How you plan to use the bar affects the type you need. Someone who wants a handle to support them while getting in and out of the tub needs a different design than someone who wants a grab bar in the shower.
  • Style and material: Some grab bars are small and discreet, while others are large and noticeable. Ideally, your grab bar should also match the aesthetic of your bathroom.

Our favorite straight grab bar
Vive Metal Grab Bar

If you’re looking for a basic grab bar for your bathroom wall, this model by Vive is a great option. Vive makes its metal grab bar out of sturdy steel that can support up to 440 pounds. The grab bar installs into acrylic, fiberglass and drywall surfaces, and Vive includes all the necessary screws and anchors. Customers can choose between three length options and three colors, including black satin, brushed nickel and white. Self-installation is simple using the included screws and anchors, andprofessional installation is available for $116.90.

6 Best Shower Grab Bars Reviewed in 2022 (2)

Features
  • Cost: $28.99*
  • Size: 12,”16” or 24”
  • Material: Stainless steel

BUY ON AMAZON
*As of publishing

Our favorite suction grab bars for showers
Safe-er-Grip Shower Handle

If you’re looking for a temporary grab bar, consider the Safe-er-Grip Shower Handle. You can install, remove and reinstall this suction cup grab bar without any tools and without causing damage to your bathroom walls. Safe-er-Grip does not guarantee aweight limit because the baris intended to provide balance, not a full-body hold. Customers can install this shower handle in seconds with two tab levers— no screws or tools are necessary.

6 Best Shower Grab Bars Reviewed in 2022 (3)

(Video) Best Grab Bars For Showers Reviews 2022

Features
  • Cost: $6.99*
  • Size: 16.5”
  • Material: Plastic

BUY ON AMAZON
*As of publishing

Our favorite bathtub safety rail
Vaunn Bathtub Rail

Vaunn’s Bathtub Rail gives bathers extra stability when getting in and out of the tub. This bathtub safety bar attaches to the side of almost any tub, and it’s designed to securely fit on the wall without damaging the tub or itself. No screws or tools are needed for installation. This bar’s nonslip grip supports up to 300 pounds, and you can use the knob to lock the bathtub rail in place.

6 Best Shower Grab Bars Reviewed in 2022 (4)

Features
  • Cost: $39.50*
  • Size: 14”
  • Material: Stainless steel

BUY ON AMAZON
*As of publishing

Our favorite curved grab bar
Stander Security Pole

If you’re looking for a high-end way to get in and out of your tub or shower safely, we recommend the Stander Security Pole. The pole stretches from the ceiling to the floor and hasa curved bar in the middle that can supportup to 300 pounds.Many customers choose to put one near their beds as well. The pole isavailable in iceberg white or metallic black, andall tools and components are included for a simple at-home installation.

6 Best Shower Grab Bars Reviewed in 2022 (5)

(Video) Top 10 Bath and Shower Grab Bars You Can Buy On Amazon April 2022

Features
  • Cost: $169.00*
  • Size: 7’ to 10’
  • Material: Zinc-plated steel

BUY ON AMAZON
*As of publishing

Our favorite grab bar with shelf
Moen LR2354DBN

For a strong grab bar that can hold you and your shampoo at the same time, choose Moen’s LR2354DBN corner shelf. This discreetgrab barcomes with a brushed nickel metal bar and plastic shelf. Moen’s corner shelf can support up to 500 pounds if installed into a stud and up to 250 pounds if installed without a stud. Installation is simple with SecureMount hardware.

6 Best Shower Grab Bars Reviewed in 2022 (6)

Features
  • Cost: $46.26*
  • Size: 9” long
  • Material: Metal bar, plastic shelf

BUY ON AMAZON
*As of publishing

Our favorite adjustable grab bar
Drive Medical Adjustable Safety Rail

If you’re not sure what height, width or location is best for your bathtub grab bar, try out Drive Medical’s Adjustable Safety Rail. This bathtub safety bar is adjustable between 14 inches and 17 inches high and between 3 inches and 7 inches wide. Its steel frame holds up to 300 pounds. Installation is easy and completely tool-free, butthis product should not be used in fiberglass tubs.

6 Best Shower Grab Bars Reviewed in 2022 (7)

Features
  • Cost: $29.19*
  • Size: 14” to 17” high and 3” to7” wide
  • Material: Steel frame

BUY ON AMAZON
*As of publishing

Bathroom grab bar FAQ

What is a grab bar?
A grab bar is a device that a person holds on to for stability. Grab bars attach to walls, ceilings and bathtubs to help people stabilize themselves in areas with a high fall risk, like bathrooms or staircases.
How much does a grab bar cost?
Grab bars usually cost anywhere from $20 to$200, but a typical grab bar price is $40 to$100. Unless you choose to install the device yourself, grab bar installation costs can add $100 to$200 to your bill.
Are suction grab bars safe?
Suction cup grab bars are safe if they are installedon a clean surface and the bar isonly used as a stabilizing device. Suction grab bars are not designed to hold hundreds of pounds of weight, so a user should not expect one to supporttheir entire mass.
Can I install grab bars in other parts of my house?
Yes, you can install grab bars in any room of your home —many people install grab barsin theirbedroom and hallways. Keep in mind that some designs may not work on drywall.
Do plumbers install grab bars?
They can, but it depends on the grab bar. It might be wise to have a plumber install permanent bars that require drilling or extensive modifications. However, many shower bars mount via suction cups, so installation doesn’t require a plumber.
Does Medicare cover grab bars?
Original Medicare plans do not cover grab bars, but some Medicare Advantage Plans may cover shower grab bars, depending on your policy.
(Video) Top 5 Best Folding Shower Seats in 2022 Reviews

Bottom line

With 1 in 4older people experiencing a fall every year, and the majority of those accidents occurring in the bathroom, there is an urgent need for shower grab bars. Though there are hundreds of designs to choose from, we picked our six favoriteshower grab bars based on their low cost, innovative design and easy installation. When shopping for a grab bar, measure your bath space, consider your intended use and choose a design that matches your needs.

Next, read about how to find the best shower chairs.

Did you find this article helpful? |

Share this article

(Video) Best Grab Bars For Showers With Suction Cups

FAQs

What is the best material for a shower grab bar? ›

Although shower grab bars are available in a variety of materials and finishes, most are made from stainless steel. Stainless steel is a popular choice among customers because it won't rust or corrode over time when exposed to water.

What size grab bar is best for shower? ›

We recommend one (1) straight shower grab bar. The most common length would be 24″ or 36″ (This measurement depends on the length of the shower).

What is the best diameter for a grab bar? ›

The diameter of the grab bar: The diameter of the grab bar should be 1 1/4 inches (32 mm) minimum and 2 inches (51 mm) maximum. The space between the grab bar and the wall: There should be a space or gap of at least 1-1/2 inches (38mm) between the wall and the grab bar.

How thick should grab bars be? ›

Grab bars are usually available in two common diameters – 1 ¼ inch and 1 ½ inch. If you have joint issues or smaller hands, a grab bar with a smaller diameter may be easier to grip. Otherwise, 1 ½ inch is standard and most often encountered in public settings where you may find grab bars.

Should grab bars be angled? ›

Grab bars should be angled to best allow a person using them to get enough grip to pull themselves up. For example, if a senior is sitting on a bench or in their tub, the angle of the grab bar provides additional leverage that a horizontal bar would not.

Do chrome grab bars rust? ›

Chrome. Chrome is another popular material for shower grab bars. Like stainless steel, it is strong, durable, and resistant to rust and corrosion.

Why are grab bars installed at an angle? ›

Different Angles

Vertical grab bars help if you have limited balance and are easier to grip. Because they are vertical, they provide less wall covering when a person is walking than diagonal or horizontal grab bars.

Do shower grab bars have to be installed in studs? ›

Grab bars can be installed on surfaces like drywall, tile, fiberglass, stone, concrete and wood paneling. For the most support, grab bars should be attached directly to the studs inside a wall.

Where is the best place to put grab bars in the shower? ›

For tub/shower combinations, grab bars should be installed on the back wall and control wall of the shower. The ADA recommends that two bars be installed on the back wall, one 8 to 10 inches from the rim of the tub and the other parallel to it 33 to 36 inches from the base of the tub.

What height should grab rails be? ›

700mm from above floor level is a good height for most people when getting up from the toilet. A vertical grab rail, placed at approx. 800mm above the floor, can give you extra support when pulling up from a seated position.

Are vertical grab bars required in showers? ›

The ADA Standards do not require a vertical grab bar at bathing fixtures. Vertical bars are helpful and provide support when stepping into bathtubs or showers. The ICC A117. 1 standard, which is referenced by the International Building Code, requires an 18″ minimum vertical grab bar at transfer showers and bathtubs.

What are two requirements when installing grab rails in a bathroom? ›

Side wall grab bars should be at least 42 inches in length, with one end 12 inches or less away from the wall behind the toilet, and one end at least 54 inches away from that wall. Rear wall grab bars must be at least 36 inches long.

Are suction cup grab bars ADA compliant? ›

Are suction grab bars ADA compliant? No, suction grab bars generally are not ADA compliant. The limiting factor is usually not meeting ADA weight capacity requirements. Many suction grab bars do not support up to 250 lbs of weight.

How do you secure grab bars without studs? ›

Grab Bar Without Studs - YouTube

How high should horizontal grab bar be in shower? ›

In toilets and showers, the tops of horizontal grab bars need to be 33 to 36 inches from the floor. In a transfer shower, the bottom of the vertical bar must be 3 to 6 inches above the horizontal bar on that wall.

How should grab bars be installed? ›

Grab Bar Installation For An Accessible Bathroom - YouTube

How do you clean shower grab bars? ›

Removing Dirt & Grime: All surfaces should be washed with a mild dish-washing liquid soap or powdered detergent, ammonia, and warm water. Use a soft cloth. The material should then be rinsed with clear water and wiped with a damp sponge and dried.

How do you install a grab bar in a fiberglass shower? ›

Installing A Grab Bar in a Fiberglass Shower. - YouTube

Do grab bars rust? ›

Grab bars that are made of 3 or 4 series metals (stainless) should not rust, grab bars made of 1 or 2 series metals can rust even though they are stainless steel.

How do you attach grab bars to tiled walls? ›

how to install shower grab bars on tile - YouTube

How far should grab bars be from toilet? ›

When installing the rear grab bar, it should extend at least 12 inches from the centerline of the toilet on the side closest to the partition and at least 24 inches from the toilet centerline on the open/transfer side. All grab bars should be installed with 1.5 inches of space between the grab bar and the wall.

How far do grab bars stick out from the wall? ›

Each grab bar shall be 24 inches (610 mm) long minimum and shall be installed 24 inches (610 mm) maximum from the head end wall and 12 inches (305 mm) maximum from the control end wall.

Can you use toggle bolts for grab bars? ›

Our solution, which we recommend, is to use toggle bolts to attach the grab bars. Toggle bolts have wings that open inside a hollow wall. They are commonly used to hang heavy objects on drywall where setting a screw or nail in a stud isn't possible.

Can you use wall anchors for grab bars? ›

Grab bars are highly recommended to be installed into wall studs to ensure the security of the bar. There are other methods to install them just in case you don't know where your studs are. Wall anchors can be used in place and will provide a secure grounding for the installation, even with tile walls.

How much does it cost to install a grab bar in a shower? ›

Average Cost to Install a Grab Bar
Average Cost$340
High Cost$600
Low Cost$80

What is an ADA compliant grab bar? ›

A 42 inches (1065 mm) minimum length grab bar is required on the side wall, spaced a maximum of 12 inches (305 mm) from the back wall and extending a minimum of 54 inches (1370 mm) from the back wall at a height of 33-36 inches (840-915 mm).

How can I make my bathroom safe for seniors? ›

10 Tips for a Senior-Proof Bathroom
  1. #1: Update Lighting. ...
  2. #2: Add Grab Bars and Safety Rails. ...
  3. #3: De-clutter & Organize. ...
  4. #4: Install a Walk-In Shower & Hand-Held Shower Head. ...
  5. #5: Add a Shower Chair or Transfer Bench. ...
  6. #6: Keep Items Within Easy Reach. ...
  7. #7: Use Non-Slip Mats & Ditch Throw Rugs. ...
  8. #8: Raise the Toilet.
30 May 2022

How long should a grab rail be? ›

There are standard lengths of grab rail: 300mm, 450mm, 600mm, 750mm, 900mm and 1200mm. Choose the length that fits the spaces between your studs if your house is stud framed. You can check where the studs are by using a stud detector.

Where should grab rails be positioned? ›

It should be positioned at a height that you can comfortably reach, whether you're stood inside or outside of the enclosure. Horizontal grab rails fixed either side of a shower seat can help to prevent you sliding off a seat.

What sizes do grab bars come in? ›

The sizes range from 12 inches to 48" inches. However, some manufacturers offer a range from 9 inches to 60 inches. In addition to being offered in different lengths, grab bars are also available in diameters of both 1-1/4" and 1-1/2".

What is an ADA compliant shower? ›

Therefore, an ADA shower is one that is sufficiently handicap accessible. Such showers typically feature wide openings, low thresholds, grab bars, and built-in seating. One of the most common versions of an ADA compliant shower is a transfer shower.

What is the difference between a transfer shower and a roll in shower? ›

There are two types of showers: Transfer showers and roll in showers. Transfer showers are one's people with mobility impairment will “transfer” onto. Roll-in showers are the ones that a person in a wheelchair will roll their wheelchair into. ADA Section 608.4 requires permanent shower seats in transfer showers.

What is rollin shower? ›

Roll-in showers, also called barrier-free showers, are designed for people to directly roll into the shower using a shower wheelchair. The shower should be large enough for the wheelchair to maneuver within the stall. Most roll-in showers have bevelled thresholds about 0.5" high to allow the wheelchair to roll over.

How safe are suction shower grab bars? ›

Are Suction Grab Bars Safe? Suction grab bars can work for some individuals but they do tend to lose their grip after a while so for safety's sake – we recommend not to use them.

Do suction cups work in showers? ›

A suction cup is a perfect solution for hanging various things in the bathroom, shower, car, etc. It is especially handy if you want a shower caddy or a shower head holder, but can't drill holes into the tiles because you are in a rented apartment.

How much weight can a grab bar hold? ›

What is the ADA compliant weight capacity requirement for grab bars? According to federal ADA guidelines, it is required for a grab bar to be able to support up to 250 lbs (114 kgs) when installed in public places. This is because a grab bar is meant to support the user's full body weight.

Can grab bars be installed in a fiberglass shower? ›

You can install a grab bar in a fiberglass shower using mounting brackets that are compatible with fiberglass. You'll have to cut a hole into the fiberglass wall and then drill to secure the grab bar in place.

Do shower grab bars have to be installed in studs? ›

Grab bars can be installed on surfaces like drywall, tile, fiberglass, stone, concrete and wood paneling. For the most support, grab bars should be attached directly to the studs inside a wall.

Do adhesive grab bars work? ›

No Drill Grab Bar by Drive Medical - YouTube

What is best location for grab bars in shower? ›

Shower Stall Grab Bar Placement

Vertical entrance bar should go close to the shower door jamb. Horizontal bar should go along the side wall, 34-36 inches above the floor. Vertical bar on the faucet end wall should go near the faucet handles.

How do you secure grab bars without studs? ›

Grab Bar Without Studs - YouTube

How do you install a permanent grab bar in a shower? ›

Grab Bar Installation For An Accessible Bathroom - YouTube

Can grab bars be installed in drywall? ›

Using the grab bar mounting flange as your guide, mark the pilot hole locations oriented over your stud marks. For mounting on drywall, you'll need to drill pilot holes using a bit that's slightly smaller than the shaft of the mounting screw (the core that the threads wrap around).

How far do grab bars stick out from the wall? ›

Each grab bar shall be 24 inches (610 mm) long minimum and shall be installed 24 inches (610 mm) maximum from the head end wall and 12 inches (305 mm) maximum from the control end wall.

Where do you put grab bars in the elderly? ›

KOHLER Grab Bars - Recommended Mounting Locations and Installation ...

Why are grab bars installed at an angle? ›

Different Angles

Vertical grab bars help if you have limited balance and are easier to grip. Because they are vertical, they provide less wall covering when a person is walking than diagonal or horizontal grab bars.

What's the difference between an assist bar and a grab bar? ›

A grab bar is always mounted to a wall, not a glass shower door. It's engineered and tested with quality fasteners to safely support about 350lbs, without pulling way from the wall. Grab bars, also known as assist bars, are installed to help an individual easily and safely exit or enter a shower or bathtub.

How much are shower grab bars? ›

In general, most homeowners spend between $85 and $300 on grab bar installation. The average household typically installs a stainless steel L-shaped grab bar, for a cost of around $248.
...
Grab Bars Cost.
Grab Bars Installation Cost
National average cost$248
Average range$85-$300
Low-end$86
High-end$343
2 Jan 2022

How safe are suction shower grab bars? ›

Are Suction Grab Bars Safe? Suction grab bars can work for some individuals but they do tend to lose their grip after a while so for safety's sake – we recommend not to use them.

How do you make suction grab bars stick? ›

How To Install A Suction Grab Bar - YouTube

Are suction grab bars safe to use? ›

Yes, suction grab bars are safe, however, they do have their limits and installation obstacles.

Videos

1. Best Towel Rack Reviews 2022 [Top 6 Towel Racks Suggestions By Expert]
(Better & Best Products)
2. 2022 Ember 191 MDB Detailed Exterior Six Month Review
(Halln' Ember)
3. The BEST and WORST Apple Watch Band | Solo Loop 2022 | Non Influencer Review
(Elevation Every Weekend)
4. Top 10 Best Toilet Safety Rail Reviews In 2022
(Product Arctic)
5. #soapmaking #daphne'sdiary #mixedmedia DAPHNE'S DIARY SOAP MAKING TIPS 6/2022
(Colleen Seymour Crafts)
6. Family Guy Season 8 Ep.6 - Family Guy Full Episode NoCuts #1080p
(Bellerophon Studio)

You might also like

Latest Posts

Article information

Author: Geoffrey Lueilwitz

Last Updated: 10/25/2022

Views: 5898

Rating: 5 / 5 (80 voted)

Reviews: 87% of readers found this page helpful

Author information

Name: Geoffrey Lueilwitz

Birthday: 1997-03-23

Address: 74183 Thomas Course, Port Micheal, OK 55446-1529

Phone: +13408645881558

Job: Global Representative

Hobby: Sailing, Vehicle restoration, Rowing, Ghost hunting, Scrapbooking, Rugby, Board sports

Introduction: My name is Geoffrey Lueilwitz, I am a zealous, encouraging, sparkling, enchanting, graceful, faithful, nice person who loves writing and wants to share my knowledge and understanding with you.