How to Fill a Gap Between Bathroom Vanity and Wall? (2022)

The gap between the bathroom vanity and wall can be very difficult to fix. Well, one can fix the problem yet may not be up to the satisfaction. By following certain tricks or methods may help. Other than that, more solutions can come into consideration.

By following the below tips regarding the bathroom vanity and wall gap and how to fix that might help you to proceed further.

Why do gaps between bathroom vanity and wall occur?

There might be several reasons why the gaps between the bathroom vanity and wall can occur. Yet, many may like to fix it before doing it right. Some caring efforts can prevent the gaps.

Table of Contents

How to Fill a Gap Between Bathroom Vanity and Wall? (1)

The most common reason for the gaps is due to the measurement error. Well, while measuring and selecting the size of the vanity, there may occur some errors. Which later can turn into a gap.

Apart from that, if there are sink installations, the gap will definitely occur. In that case, only fixing it may work. Or else, sometimes the vanity comes with a widened leg. That may also cause some gaps.

That’s why before installing the bathroom vanity, everything should be cleared out.

(Video) How to Fill Gaps in Walls - Home Renovation Tips by Paul Ricalde

How to fill a gap between bathroom vanity and wall?

One can fill the gap between bathroom vanity and wall by putting sealant tap or caulks. Apart from that, the gap can be filled with a rod. Better to measure the size before installing the bathroom vanity to prevent the gap between the wall and vanity. A little bit of carefulness can help a lot.

Filling a gap may seem difficult. Well, that also depends on the size of the gap. Bigger gaps can not be filled easily; meanwhile, smaller gaps might look ignorable yet have a small effect on the appearance.

Shortening the methods below to fill the gap between bathroom vanity and wall.

Sealant tape:

Sealant tape works efficiently to fill up small gaps between bathroom vanity and wall. If the gap is medium to small, simply putting sealant tape on top might give a great outcome. One needs to put the sealant tape on the surface and press it.

Later make it even with the vanity. Well, putting sealant tape between the gaps is also preferable instead of putting it on the surface.

How to Fill a Gap Between Bathroom Vanity and Wall? (2)

Putting white silicon:

Putting white silicon to even the gap works very accurately here. Well, the gap might look like a filled part. As a result, that might not harm the appearance of vanity. Yet, the water can affect the silicon.

Putting an even filler of white silicon may be required even if you add a rod.

(Video) Bathroom Counter Top Gaps - Mold, Mildew And Water Damage Prevention

Caulk the gap:

Small gaps can be caulked easily. One can fill the gaps or put a rod in it. Later can decorate the parts. Also, coloring the parts may bring a great outcome. Caulking is the best option here.

One can put latex caulk to fill the gaps. It will be much easier if one can put a rod before Caulking. As it may require fewer caulks and give better strength.

Adding tiles:

Well, adding tiles might seem a bit expensive. Yet if the gap has the space to fit in tiles, indeed adding tiles is better. Tiles may beautify the appearance even more. If the space is too small to fit in tiles, better not add tiles.

Once you add tiles to fill the gap, you may require more tiles to make the appearance unharmed. That, in any case, can cost a bit. Many may prefer this also for smaller gaps. Adding tiles in smaller gaps may make the place a bit tiny than before.

That’s why only for bigger gaps it is more suitable.

How to fix a gap between the vanity and the sidewall?

Small gap:

Smaller gaps may require less effort to fill the gaps. Certain methods or tricks are preferable for smaller gaps. Add some of them below with a shorter explanation.

Caulk the gap:

One can easily fill up the smaller gaps by caulking the gap. One can use cement or latex caulk. Whatever one prefers. Just need to put the caulking material in the gap and fill it. Lastly, seal it.

Well, putting a road before that may help a lot. As one may need less amount of caulk. Yet the best option for filling the gap between vanity and the sidewall. Well, coloring with the color of the wall is the best here.

How to Fill a Gap Between Bathroom Vanity and Wall? (3)

Visit here to see this on Amazon

(Video) How to install and square a sink that is butted up to walls that are not square

Sealant taps:

Using sealant taps to fill in the gaps between the bathroom vanity and the sidewall is the most frequent way to use. For a 2 inch gap, one can easily use sealant tape. Yet, the gap may become visible.

Well, for these small-sized gaps, one can put sealant tape on the top and press it to the vanity.

Large gap:

Filling in large gaps may seem a bit difficult, and indeed it is. Filling a small gap might not be a big deal, yet filling the larger ones may indirectly catch one’s eye. Below some applicable methods for filling the bigger gaps is given below.


Larger gaps, more likely to be of 4 inches or more, can be filled with tiles. Thicker tiles can easily fit into the gap, making the gap look more aesthetic. Well, this might be time-consuming as well as require more money.

That’s why better be prepared while installing vanity to not cause this gaping problem.

Using white silicon:

Filling the gaps with white silicon from down to the bottom and making it even with the wall may help here the most. To fill up larger gaps, one can follow this method. In that case, even out the surface and also make sure to color it with the wall color.

The silicon should be put in an even layer so that the layer mixes up well with the wall. Otherwise, it might become eye-popping. Later color it with the wall color. As a result, this part may seem like a wall.

How to Fill a Gap Between Bathroom Vanity and Wall? (4)

Visit here to see this on Amazon

(Video) 🏠 60+ Stunning Ideas for Gap Between Bathroom Vanity and Wall | Gap Between Vanity and Wall

How big of a gap can you caulk?

Almost half a half-inch to the maximum can be caulked easily. Larger gaps than that are not suitable for Caulking.

One can caulk smaller gaps within a few seconds in an effective way. Yet if the gap is larger, Caulking may not work. When you fill a lot of space, it will definitely catch the eyes of many. Apart from that, a huge amount of caulk material might be needed to fill the gap.

One can easily fill half an inch of a gap by using caulk. A larger gap from this might not be suitable for filling. Instead, one can follow other methods that will not make the gap eye-popping.

How much space should be between vanity and wall?

According to the code, the gap should be 4 inches. Yet some may prefer less or more gap between the vanity and the wall.

There should be a minimum space between vanity and wall. If one doesn’t keep that space, it might become difficult to clean. Some may prefer only 2 inches of gap or even no gap. That’s upon their choice.

But the gap is better to be kept between 4 inches. If it seems larger, later can be fixed. Otherwise, there is no option for fixing. Or else you can determine the gap according to your taste. If one wants to clean the beneath easily, one might want to keep a larger gap.

How much space should be between vanity and shower?

The space that should be kept between vanity and shower may differ according to the vanity size and shower, which might be within 21 inches.

Well, the space may differ as all the vanity sizes are not the same. The shower should be kept a bit far from the vanity. Otherwise, the water may get on the vanity. All these might make cleaning of vanity a bit tough.

The space should be almost 21 inches at least. If it was a bathtub, the difference would have been less. One can also adjust the space by adjusting the vanity size.

(Video) 17 - Vanity Trim - Manhattan Wood Project

Final thoughts:

Summing up, the gap between bathroom vanity and wall needs effort to fill in yet not impossible. Using a sealant tap or putting a rod might help. In either case, measuring the proper step from the first of installing the bathroom vanity is further better. Later one may not need to face problems.


How to Fill a Gap Between Bathroom Vanity and Wall? ›

Caulk (small gaps)
  1. Prepare the area by cleaning it thoroughly and making sure it is dry before caulking.
  2. Line the walls with tape so you don't get any caulk on them. ...
  3. Fill in the gap with the caulk and let it dry completely before using the sink.
  4. Use transparent caulk if you don't want it to show.

How do you fill the gap between cabinets and walls? ›

But don't despair, you can make these gaps disappear fast and easy with a caulking gun and a tube of caulk. You can use a colored caulk matching either the cabinet or wall color or paint white caulk to give your kitchen a more detailed, seamless appearance.

How much space should be between vanity and wall? ›

Clear floor space

NKBA designers recommend a 30″ clearance between the front edge of a fixture, such as a vanity or toilet, and any other fixture or wall. The building code allows for a minimum of 21″.

How do you fill a large gap between a wall and a bath? ›

How to Caulk Large Gaps in Bathtubs : Caulking Tips - YouTube

How do you fix a gap in a vanity? ›

If your vanity is almost flush with the wall, you can fill the gap with silicone caulk. Adding a backsplash or backer rod could fix a gap between the vanity and the back wall. Alternatively, you could tile a side wall or use a vanity filler strip.

How big a gap can silicone fill? ›

Step 2. Measure the size of the gap that needs to be filled. A single bead of caulk can fill gaps up to 1/4 inch. If the gap is slightly larger than this, fill it with a bead of caulk deeper into the gap, but not flush with the surface.

What are cabinet fillers? ›

A filler is a piece of finished wood used to "fill" openings or gaps between cabinets, or a cabinet and any obstruction, that would inhibit the doors or drawers from fully functioning.

Should bathroom vanity be flushed with wall? ›

In nearly all cases, the big answer is yes — you should attach your vanity to the wall. What's more, the vanity should be flush against the wall, with no space between the back and the wall itself. The reason for this is to hide and protect your plumbing.

Should I caulk between vanity and wall? ›

It's important to caulk around a bathroom vanity to protect water from seeping into cracks and damaging the vanity cabinet or bathroom walls. Caulking around a bathroom vanity can prevent a future mold or mildew problem that could cost thousands to fix, so it's worth the extra hour or so to caulk.

How do you fill a 1 inch gap between countertops and walls? ›

Caulk the Gap

The easiest way to fill the gap is to use silicone caulk. Generally, caulk is only designed to fill gaps that are 1/4 inch or smaller.

How do you caulk a 2 inch gap? ›

Tips on Caulking Wide Gaps : Home Sweet Home Repair - YouTube

How do you caulk a large gap? ›

How to Caulk BIG GAPS!!!! - YouTube

How do you use gap filler? ›

Selleys | How To Fill Gaps In Skirting Boards using No More Gaps

Should a vanity go wall to wall? ›

Are Bathroom Vanities Always Installed Against A Wall? In most cases, the bathroom vanity is installed against a wall. Because it is necessary to have plumbing to provide water to your sink and drainage for the used water, housing it against the wall allows for ease of installation.

How do you fill the gap between cabinets and backsplash? ›

Use silicone caulk to fill the gap between any tile surface and cabinets. Caulk used to fill the gap between a tile backsplash and your cabinets will create a waterproof, flexible seal between the two surfaces. Grout will not effectively seal this gap.

How do you fill a 1 inch gap between countertops and walls? ›

Caulk the Gap

The easiest way to fill the gap is to use silicone caulk. Generally, caulk is only designed to fill gaps that are 1/4 inch or smaller.

How can I hide the gap between my kitchen cabinets? ›

For gaps less than 1/8-inch, it's acceptable to use colored caulk or other products that come in a tube. If you plan on refinishing the cabinets, you can also use wood putty that dries hard to fill gaps or cracks. If the cabinets do not need finishing, apply color-matched caulking to the gaps.

How do you install wall cabinet fillers? ›

Installing pantry and base filler panels | kaboodle kitchen - YouTube


1. Filling an excessive gap between baseboard and wall
(Interior Works)
2. Caulking gaps between countertop and wall
(Home renovation and repair THE RIGHT WAY)
3. HOW TO: Fill big gaps around your sinks.
(DuPont Performance Building Solutions)
4. How To Seal A Big Gap Between Tile Floor And Tile Wall In A Bathroom Or Shower
(Joseph K)
5. Cabinets 101 How to install Filler Strips & Cover Panels - DIY
(Construction Coach)
6. How to Caulk or Re-caulk a Vanity
(Betenbough Homes)

You might also like

Latest Posts

Article information

Author: Carmelo Roob

Last Updated: 09/19/2022

Views: 5419

Rating: 4.4 / 5 (65 voted)

Reviews: 80% of readers found this page helpful

Author information

Name: Carmelo Roob

Birthday: 1995-01-09

Address: Apt. 915 481 Sipes Cliff, New Gonzalobury, CO 80176

Phone: +6773780339780

Job: Sales Executive

Hobby: Gaming, Jogging, Rugby, Video gaming, Handball, Ice skating, Web surfing

Introduction: My name is Carmelo Roob, I am a modern, handsome, delightful, comfortable, attractive, vast, good person who loves writing and wants to share my knowledge and understanding with you.