This post is in partnership with Lowe’s.
A few months ago, Chris and Julia asked us to be a part of their Dream Team. This teamwouldhelp one homeownertransform a kitchen or bath, and together, we’d knock out a therenovation in just a few short days for this year’s Lowe’s Spring Makeover. Having completed a similar whirlwind renovation last year, Scott and I were sayingyes! before we even heard the details, but as the story unraveled, it only got better! Also part of the team was our friend (and renovation guru)Daniel of Manhattan Nestand Chris’s brother Brandon, who, as it turns out – and not surprisingly! – is every bit as handy as Chris. Chris and Julia spearheaded the project, and it was all hands on deck.
After more than 2,000 applications poured in, it was decided that we would be headed to Baltimore to renovate Nate and Aura’s kitchen! It’s hard to believe that we wrapped a kitchen renovation in less than four days, but our team of six + the homeowners brought every last ounce of energy we had. It was a whirlwind trip in every sense of the word, with minimal sleep, too much fun and a lot of drywalling, painting, tiling, trimming and all-around-project-ing. No detail was too small, and we all rallied together to carry out the plans that Chris and Julia pulled together.
We couldn’t be more excited to share the transformation from top to bottom today, butwe also want to send out a huge thank you! to everyone who cheered us on as our Stories unraveled at all hours of the day! It was really fun, sweet and motivating to receive all your encouragement.(I put together a little reel of our Storyclips right here, too!)
There are few things more satisfying than a good before and after, so I’m going to dive right in! Nate and Aura’s kitchen had a lot of mysteries, including an oddly low ceiling (compared to the other rooms in their home), too-deep cabinet soffits and 1-by faux beams. Here’s where they started:
A lot of surprises were quickly uncovered, most of which were really, really good. Nate and Aura discovered a brick wall beneath the plaster, the ceiling was dropped by an entire foot, and luckily, those soffits were empty. But while all thatnews was great, it also meant a quick change of plans!Taller cabinets were ordered to compensate for the new roomheight and beadboard would be used to cover the damaged ceiling. While all of this required more demo – and in turn, more finish work – than what we originally planned for, we are absolutely thrilledwith the results!:
Note: All items are listed at the bottom of this post, or scroll over image(s) for sources.
Let’s jump back, so we can see how we got from A to B (to G to Z!). Nate and Aura were able to uncover the brick and rip out the existing tile floor before we arrived, leaving us with this clean slate:
We all jumped in, easily pulling down the 2x4s that held the dropped ceiling in place and removing an awkward pantry. At one point in this home’s history, there was a window where that pantry was, but it had since been completely bricked over from the exterior (sad!). You can see it below, on the left:
While day onebrought a lot of demolition, every day that followed brought more and more impact. Drywall! Boom.Cabinets! Boom. Ceilings! Boom. Every completed task brought more motivation, more eagerness to cross the finish line.
In-between the larger to-dos, smaller projects (that all add up!) were constantly humming along in the background. The crown molding and beadboard ceilings were painted ina satin finish using Valspar paint that was color matched to the white of the upper cabinets. The original columns were also painted in the same satin finish, knocking down the high gloss that was once there. Keeping in the painting theme, these shelving bracketsfor the coffee station were sprayed a matte black, and theseproject panels(used for the shelves) were also painted black:
All of the lower cabinets were painted in Valspar’s Beguile in a satin finish, a super pretty gray-green that I’m trying to find a use for in our home now! While the doors and drawers were set aside to dry, the girls tag teamed the subway tile backsplash, in-between caulking and spackling every last nail hole, pock and seam in the room:
The last evening in Baltimorewas our latest night yet, and while Chris and Brandon laid the flooring, the rest of us focused on staining and sealing the countertops, installing cabinet hardware and hanging lights. The fourth and final day was a short one, with only a handful of hours to pull everything together, but every last item on our list was completed – and then some. That last morning was a flurry of baseboards, paint touch-ups, plumbing and cleaning.
Finally, we could all take a step back, and you could almost feel each and every one of us taking in a collective breath. Together, we had done it!
Starting on our last full day, Julia had asked Nate and Aura to treat themselves to a day off. We wanted to surprise them with a room they wouldn’t recognize, and the day of the reveal, we watched as Aura cupped her hands over her mouth and Nate perma-smiled. They ran their hands over the counters, pointed out the dishwasher and turned the faucet on and off.There may have been some choking up happening, too – usand them!
Can you believe that this entire kitchen came together in under $5k? (Yes, including appliances!) Paint was the real hero, which was used to update in-stock Lowe’s cabinetry, including this cute little coffee station made up of wall cabinets:
The white shaker style cabinets are also in-stock at Lowe’s, and we usedthese knobson all the doors and drawers, adding a warm metallic finish. The upper cabinets were raised to make way for open shelving below, an endearing detail that addsso much personality!
One of the biggest ‘saves’ in this renovation was the countertops. They werebuilt from thesepanels and trimmed with 1x2s to give them a nice, hunky profile. They were treated with wood conditioner before applying one coat of Minwax Provincial stain and sealing them with three coats of Polycrylic in a satin finish:
I’m sure we all have our favorite elements in the room, but for me? The beadboard panels that were used on the island (and the ceiling – hang tight!) areeverything. Not only was it practical to cover the bare sides of the base cabinet and dishwasher used in the island, but my goodness, it’s so pretty! After the flooring was installed, quarter round was added at the base to give the island the most seamless finish. It’s like it was always there!
As I mentioned earlier, the beadboard ceiling and molding details were a result of realizing we had an extra foot of room height to play with, and as each element was layered upon the next, our teamoohed andaahed without fail. The seams from the beadboard were hidden with 1x4s, and after being caulked, spackled and painted, the look feels incredibly high-end, while still maintaining the coziest, casual vibe. The moldings are made up of two parts: 1) Around the entire perimeter of the room, 1x4s lay flat against the ceiling, and 2) with the exception of the cabinets, an additional 1×4 was used as a trim detail on the vertical wall surface. The cabinets, on the other hand, had true crown molding installed, with a smaller railmolding running right above the cabinets themselves and around the vent hood:
There are countless elements from this makeover that Scott and I are looking to incorporate into our own home. But without a doubt, somehow, somewhere, we need a little beadboard in our lives!
One more before and after, if you will?We made sure to grab a team photo on thefirst day (oh, how bright eyed and bushy tailed we look!), andI think the first photo belowperfectly embodies our team. Motivated. Silly. Excited. Having followed along with Chris and Julia‘s and Daniel‘s renovations over the years, you have this idea that you’re all in ittogether, despite being so stretched out across the country. It was the best feeling to work as a team toward this one common goal; my heart swells foreach and every one of these guys!(Scott had an earlier flight home than the rest of us, so he’s sadly not in the after photo, boo.)
A huge thank you to Lowe’s for allowing us all to make this happen for Nate and Aura, and to Nate and Aura forjumping in alongside us, welcoming the team into their home and keeping their chins up through it all!
All sources below, and be sure to check out the other recaps on Chris Loves Julia and Daniel’s hilariously accurate behind-the-scenes peek at Manhattan Nest!
Wall color: Valspar Promenade in eggshell | Lower cabinet color: Valspar Beguile in satin | GE stainless steel Energy Star refrigerator | Samsung 5-burner self-cleaning range| Broan undercabinet range hood |Whirlpool stainless steel Energy Star dishwasher | Superior Sinks undermount sink | VIGO 1-handle pre-rinse faucet | Countertops |Brainerd champagne bronze round cabinet knobs |Backsplash | Silverado grout for backsplash | Beadboard |Pergo Portfolio Modern Oak Embossed Wood Laminate Flooring | Diamon NOW Arcadia white shaker wall cabinets | Project Source base cabinets |Federal Brace universal shelf system| Project panels | allen + roth aged bronze vintage pendant light| allen + roth Hainsbrook 2-Light aged bronze cone wall sconce |Crown molding | Rail molding